Bambu Lab Smoke Purifier H2 Series (Laser)

Bambu Lab Smoke Purifier — H2 Series (Laser)

• Filters out 99% of particles down to 0.3 µm and VOCs
• Compact footprint with high dust-holding capacity
• Designed to work with Bambu Lab laser devices

Multi-Stage Filtration

Equipped with a G4 filter and F8 filter to capture dust and larger particles, a high-performance carbon filter (1200 mg/g adsorption power) to remove VOCs, and a HEPA H13 filter to trap ultra-fine particles as small as 0.3 µm. The layered filtration system helps eliminate chemicals and unpleasant odours for a cleaner creative environment.

Compact yet High-Capacity

Designed to integrate with Bambu Lab laser devices while retaining a small footprint and high dust-holding capacity. The larger capacity extends consumable life and reduces filter-replacement frequency.

Usage Tips

1. The purifier beeps when filters reach end of service life. Refer to the quick-start guide when replacing filters.
2. After assembly, pull the ventilation pipe by hand to confirm it cannot detach; fully secure the clamp. If routed outside a window, fix the pipe securely against extreme weather.
3. Recommended replacement intervals: primary filter 80–100 hours; medium-efficiency particulate filter 300–500 hours; high-efficiency particulate filter 800–1000 hours.

In the Box

• Smoke Purifier × 1
• 2 m smoke ventilation pipe × 1
• Smoke ventilation pipe clamp × 1
• Primary filter × 3 (one pre-installed)
• Medium-efficiency particulate filter × 1 (pre-installed)
• High-efficiency particulate filter × 1 (pre-installed)

Product Specifications

Official Resources

• Bambu Lab product page
• Laser safety documentation