Bambu Lab
Bambu Lab PLA Pure Filament with Spool 1kg
Bambu Lab PLA Pure Filament with Spool 1kg
Couldn't load pickup availability
Bambu PLA Pure
- Five ingredients, every one EU food-contact certified
- Low indoor printing emissions, certified to UL GREENGUARD 2904
- Safe for what kids play with, certified to EU toy-safety standards (EN 71)
- Diameter: 1.75 mm ± 0.03 mm
Only five ingredients. All food-contact safety certified.
Most food-contact filaments are tested only as a finished spool. Bambu Lab PLA Pure is tested ingredient by ingredient. From base material to pigment—just five ingredients, each one passing EU food-safety certification. A first in the category. Still the only one.
UL GREENGUARD certified. Cleaner air for indoor printing.
PLA Pure is certified to UL GREENGUARD (UL 2904), the recognized standard for 3D printer emissions. The particles and VOCs released measure below the levels of an average kitchen, living room, or office—cleaner than the air you’re already breathing.
Toy safety certified. Made for little hands.
Certified under EN 71-3*, the EU safety standard for toy materials, PLA Pure is designed for models that are touched, held, and played with.
A pretend kitchen plate. A toy truck. A treat toy for the cat. PLA Pure is made for little hands and everyday moments at home.
Made for everyday objects.
Bambu PLA Pure is tested to EU No. 10/2011, the European Union’s core regulation for plastics intended to come into contact with food. That purity is what makes PLA Pure right for the things you use most: kids’ toys, household tools, and the small objects that live close to your hands.
Proven Strength.
Fewer additives doesn’t mean weaker prints. PLA Pure matches Bambu PLA Basic in mechanical performance, with layer adhesion comparable to most PLA on the market.
Purity and strength. No trade-off.
| Project | Bambu PLA Basic | Bambu PLA Pure | Third-Party Food-Contact PLA |
|---|---|---|---|
| Strength (Bending Strength - XY) | 76 MPa | 75 MPa | 65 MPa |
| Bending Modulus (XY) | 2750 MPa | 2880 MPa | 2687 MPa |
| Toughness (Impact Strength - XY) | 26.6 kJ/m² | 20.6 kJ/m² | 20.5 kJ/m² |
| Bending Strength (Z) | 59 MPa | 55 MPa | 45 MPa |
| Bending Modulus (Z) | 2370 MPa | 2599 MPa | 2292 MPa |
| Layer adhesion (Impact Strength - Z) | 13.8 kJ/m² | 10.0 kJ/m² | 6.5 kJ/m² |
Purer Formula. Effortless Printing.
Fewer additives.* Cleaner composition. PLA Pure doesn’t just raise the bar on safety. It prints smoother too. Reduced residue helps minimize nozzle clogs and keeps extrusion consistent, spool after spool.
*Compared to Bambu PLA Basic.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load. Sync. Print. No setup, no guesswork, just reliable results.
Product Features
- Five ingredients, every one EU food-contact certified
- Low indoor printing emissions, certified to UL GREENGUARD 2904
- Safe for kids to play with, certified to EU toy-safety standards (EN 71)
- Diameter: 1.75 mm ± 0.03 mm
- All AMS Series Compatible
Printing Tips
- Food-contact certification applies to the filament itself. Producing food-contact-safe printed parts depends on equipment hygiene (particularly the nozzle), printing environment, and other factors.
- Due to layer lines, printed parts are not suitable for holding liquid foods. Because of PLA’s properties, do not expose printed parts to temperatures above 60°C. For detailed guidance, see the PLA Pure Advanced Printing Guide.
- Compatible with all printers, AMS, build plate, and nozzles. For contact-safe finished parts, the use of Bambu Liquid Glue or Solid Glue is not recommended; adhesion can instead be achieved by increasing the bed temperature.
- Dry before use to ensure the best print quality and consistent finish. Store in a dry environment after use. Refer to Bambu Lab’s filament drying guidance.
Downloads
- Filament TDS
- Filament MSDS
- Filament RoHS
- Hex Code
- EU 10/2011 Food Contact Report
- EN 71-3 Toy Safety Report
Official source: Bambu Lab AU Store.
